Product Introduction
This product is developed for the adhesion and peeling force. The solid content is 50%. This is a water-based tackifying resin specially designed to increase the adhesion of natural latex, white latex, etc. It has an enhanced bonding effect on surfaces with high or low surface activity. It has an excellent tackifying effect when used in natural latex, white latex, chloroprene rubber, acrylic emulsion and SBR emulsion, and can provide an excellent balance in the adhesion, peeling and shearing properties of the glue. At the same time, it has been proven to have good mechanical stability
Physical Property
| Appearance | Milky white liquid |
| Solid content | 50±1% |
| Viscosity (BROOKFIELD 2# 25℃ mpa.s) | 500MAX |
| pH value | 6.0～8.0 |
| Particle size (AVG; μm) | 0.1MAX |
| Density (25℃; g/ml) | 1.02 |
| Ionicity | Non-ionic, anionic |
Storage
200KG plastic barrel or 1000KG container barrel. Avoid exposure to light and avoid storage and transportation with strong oxidants. If not used after opening, it must be sealed. The transportation and storage environment temperature cannot be lower than 0 ℃ or higher than 35 ℃. Below 0 ℃, it will freeze and break the emulsion. Above 35 ℃, water will evaporate and cause precipitation.
If the above conditions are met, the storage period is nine months. Please control the inventory. If it is used beyond the storage period, please test it before use. If there is a small amount of precipitation, it can continue to be used after stirring and filtering
Special Tips
This material is complied according to our existing technology and experience, the technical
advice provided is sincere, but it is not guaranteed to be used in all samples and formulations,
all the data are for users reference only.
