Combine with HDL curing agent to make two-component prime paint of vacuum-film.
Short baking time, filmed after one hour at 70℃.
Easily filmed with Aluminum, Indium tin, copper, good adhesion with filmed layer.
Excellent full appearance with good leveling.
Not contain heavy metal and halogen.
Good solubility in most of CAB, NC, Chlorine vinega, organic solvent of ketone, esters, alcohol and aromatic.

Recommended Basic Formula:

Formula A:

DM-1 resin	XYL	T12	TOL	EAC
46.0	10.0	0.1	24.0	10.0

Formula B: N3390.

Portion: A: =100: 5.

Note:

1, Fast－dry solvent recommended for the formula．

2, Leveling agent of EFKA3882 and EFKA3883 recommended, adding volume should be in control.

3, According to the needs, adding some CAB,NC, Vinson,etc．

Advantage of DM-1 compared with traditional filmed resin for prime paint:

	Traditional filmed resin	DM-1	Advantage
Dry time	＞3 hours at70℃	＜1 hour at70℃	Greatly improving efficiency
Appearance	No color purity	Full color purity	Suitable for all high-grade products
Water resistance (10 days at40℃)	Bubble, no adhesion	No change, adhesion grade zero	Meet the high demand of products
Salt spray resistance(240 hours in neutral)	Bubble, no adhesion	No change, adhesion grade zero	Meet the demand of outdoor use
Workable formula	Adding Dryer Agent	As simple as common PU formula	Easily purchasing raw materials

Typical example:

Inner film for Car label.

Sanitary products.

Inquiry Cart 0